Lost the flash drive where PirateBox is installed, how do I make my MR3040 usable again?

Hi everyone,
I hope you can help me. I was traveling home for Christmas and the flash drive for my PirateBox is a bit large so I separated them so I can pack them better. However, it appears that I've lost the flash drive. How do I make my MR3040 usable again? By usable I mean turn it into a PirateBox again or perhaps a LibraryBox. It seems I've lost the web GUI. I was able to go into recovery mode and telnet into it but I can't seem to do anything:

root@(none):/# mount_root
/sbin/mount_root: line 1: pi_include: not found
/sbin/mount_root: line 1: pi_include: not found
/sbin/mount_root: line 1: set_jffs_mp: not found
/sbin/mount_root: line 1: determine_root_device: not found
/sbin/mount_root: line 1: can't create /.extroot.md5sum: Read-only file system
switching to jffs2

Any help will be greatly appreciated. Thanks!



Edited 2 time(s). Last edit at 12/19/2014 02:15PM by rukku.

I just read the OpenWRT troubleshooting section and learned that I should just reflash the drive.

[piratebox.cc]

My apologies for not reading the FAQs first.