Install PirateBox on MR3020 5 hours and blinking

Hi,

I’m Installing PirateBox on TP-Link TL-MR3020 using openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin firmware. I’m using SanDisk Ultra Fair (USB 3.0 32GB FAT32). I’m following the instructions in this guide [piratebox.cc]

I’m at step 3 D and it’s almost 5 hours and the router still blinking. Here’s a video

I’m using Windows connected to the router vie Ethernet.

Is my router bricked? What I’m supposed to do?

Hi,
this blinking means, that the USB Stick can't be found.

Connect via ethernet, use putty to get a telnet connection to 192.168.1.1 and have a look here : It seems my installation is still running, what went wrong?

best regards
Matthias

Hi,

I've finished installing PB a few hours ago, but didn't have the chance to post the update.
I used another flash drive SanDisk Cruzer Blade 16GB USB2.0 FAT32, when I used this flash drive it took less than 15 min to finish. Now everything works fine.

Thanks

Best regards