MR3020 Not Redirecting to PirateBox Homepage

So I stumbled across this idea a week or so ago when looking for a new project. I picked myself up an MR3020 and a large flashdrive. I sat down one night and set to work setting up my new piratebox.

I got the box up and running and a new network appeared on my wifi connection screen. I successfully connected to the network with the SSID, "OpenWRT" but upon opening www.google.com and refreshing many times I was not redirected to the piratebox homepage.

I spent a week or so browsing the forums looking for similar situations to my own. I found many posts with some commands to output to make your lives easier so I've put those at the bottom of this post as well. I'm not too familiar with OpenWRT so please excuse my "noobyness".

---

root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /mnt/usb type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
none on /proc/bus/usb type usbfs (rw,relatime)

---

root@OpenWrt:~# vi /etc/config/network


config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config interface 'lan'
option ifname 'eth0'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ipaddr '192.168.1.1'

---

root@OpenWrt:~# ls -la /mnt/
drwxr-xr-x 1 root root 0 Jan 1 00:00 .
drwxr-xr-x 1 root root 0 Jan 1 00:00 ..
drwxrwxrwx 4 root root 512 Jan 1 00:00 usb

---

root@OpenWrt:~# ls -la /mnt/usb/
drwxrwxrwx 4 root root 512 Jan 1 00:00 .
drwxr-xr-x 1 root root 0 Jan 1 00:00 ..
drwxrwxrwx 2 root root 512 Jan 1 1980 external_fs
drwxrwxrwx 2 root root 512 Jan 1 1980 install
-rwxrwxrwx 1 root root 24225 Jan 1 00:00 install.log

---

root@OpenWrt:~# ls -la /mnt/usb/PirateBox
ls: /mnt/usb/PirateBox: No such file or directory

---

root@OpenWrt:~# ls -la /opt/piratebox
ls: /opt/piratebox: No such file or directory

---

root@OpenWrt:~# cat /opt/piratebox/version
cat: can't open '/opt/piratebox/version': No such file or directory

---

root@OpenWrt:~# cat /etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 11
option hwmode 11ng
option macaddr ec:08:6b:81:45:2a
option htmode HT20
list ht_capab SHORT-GI-20
list ht_capab SHORT-GI-40
list ht_capab RX-STBC1
list ht_capab DSSS_CCK-40
option disabled 0


config wifi-iface
option device radio0
option network lan
option mode ap
option ssid OpenWrt
option encryption none

---

root@OpenWrt:~# dmesg | tail -n 20
[ 133.730000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 135.730000] br-lan: port 1(eth0) entered forwarding state
[ 241.720000] eth0: link down
[ 241.720000] br-lan: port 1(eth0) entered disabled state
[ 269.720000] eth0: link up (100Mbps/Full duplex)
[ 269.720000] br-lan: port 1(eth0) entered forwarding state
[ 269.730000] br-lan: port 1(eth0) entered forwarding state
[ 271.730000] br-lan: port 1(eth0) entered forwarding state
[ 291.720000] eth0: link down
[ 291.720000] br-lan: port 1(eth0) entered disabled state
[ 1001.720000] eth0: link up (100Mbps/Full duplex)
[ 1001.720000] br-lan: port 1(eth0) entered forwarding state
[ 1001.730000] br-lan: port 1(eth0) entered forwarding state
[ 1003.730000] br-lan: port 1(eth0) entered forwarding state
[ 1421.720000] eth0: link down
[ 1421.720000] br-lan: port 1(eth0) entered disabled state
[ 1437.720000] eth0: link up (100Mbps/Full duplex)
[ 1437.720000] br-lan: port 1(eth0) entered forwarding state
[ 1437.730000] br-lan: port 1(eth0) entered forwarding state
[ 1439.730000] br-lan: port 1(eth0) entered forwarding state

---

Like I said I don't really know much about OpenWRT but I'd assume that the issue resides in the absence of the /mnt/usb/PirateBox, /opt/piratebox, /opt/piratebox/version Although, I don't really know how to go about getting those files.

If I missed any commands please let me know as I'd be happy to post them. Thank you all for your time and for the read. Have a wonderful rest of your day!

Hi,
did you use the OpenWrt image from our website?
We have customized it.. but according to the posted output, it looks pretty close...

please give me the output of the following commands:

 cat /etc/pbx_custom_image
 cat /etc/openwrt_release
ls -l  /mnt/usb/install
tail -n 100 /mnt/usb/install.log

If you already had a first try and then reflashed: please place a fresh copy of the install folder.
Or you might try this method: [forum.piratebox.cc]

sorry for my late answer,
best regards
Matthias