PirateBox is setup and inactive but the USB key is always blinking December 11, 2017 10:19PM |
Registered: 10 years ago Posts: 53 |
free total used free shared buffers Mem: 29180 28352 828 0 7072 -/+ buffers: 21280 7900 Swap: 32764 496 32268 top Mem: 28048K used, 1132K free, 0K shrd, 6844K buff, 2136K cached CPU: 0% usr 0% sys 0% nic 98% idle 0% io 0% irq 0% sirq Load average: 0.02 0.07 0.09 1/57 1667 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 1290 1 root S 1640 6% 0% hostapd -P /var/run/wifi-phy0.pid -B 1667 1623 root R 1500 5% 0% top 1599 1598 nobody S 15564 53% 0% /usr/bin/php-cgi 1622 1599 nobody S 15564 53% 0% /usr/bin/php-cgi 1581 1 root S 8212 28% 0% python /opt/piratebox/bin/droopy -d / 1598 1 nobody S 3812 13% 0% /usr/sbin/lighttpd -f /opt/piratebox/ 1544 1 nobody S 2180 7% 0% avahi-daemon: running [CEpBGPrG_pirat 1539 1 root S 1696 6% 0% /usr/sbin/dbus-daemon --system 643 1 root S 1508 5% 0% /sbin/syslogd -C16 1 0 root S 1504 5% 0% init 1623 1533 root S 1504 5% 0% /bin/ash --login 503 1 root S 1504 5% 0% init 824 770 root S 1500 5% 0% udhcpc -p /var/run/udhcpc-eth0.2.pid 1621 1 root S 1500 5% 0% /usr/sbin/ntpd -n -p 0.openwrt.pool.n 1383 1 root S 1500 5% 0% /sbin/watchdog -t 5 /dev/watchdog 1533 1 root S 1496 5% 0% /usr/sbin/telnetd -l /bin/login.sh 645 1 root S 1488 5% 0% /sbin/klogd 770 1 root S 1480 5% 0% /sbin/netifd 1522 1 root S 1152 4% 0% /usr/sbin/dropbear -P /var/run/dropbe ^C571 1 nobody S 952 3% 0% /usr/sbin/dnsmasq -x /var/run/pirateb ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 7 root 0 SW [kworker/u:1] 62 root 0 SW [sync_supers] 64 root 0 SW [bdi-default] 66 root 0 SW< [kblockd] 95 root 0 SW [kswapd0] 143 root 0 SW [fsnotify_mark] 173 root 0 SW< [ath79-spi] 184 root 0 SW [mtdblock0] 189 root 0 SW [mtdblock1] 194 root 0 SW [mtdblock2] 199 root 0 SW [mtdblock3] 204 root 0 SW [mtdblock4] 209 root 0 SW [mtdblock5] 250 root 0 SW [kworker/0:1] 438 root 0 SWN [jffs2_gcd_mtd3] 468 root 0 SW [khubd] 477 root 0 SW [scsi_eh_0] 478 root 0 SW [usb-storage] 479 root 0 SW [kworker/0:2] 503 root 1504 S init 537 root 0 SW< [cfg80211] 616 root 0 SW< [bat_events] 643 root 1508 S /sbin/syslogd -C16 645 root 1488 S /sbin/klogd 647 root 868 S /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin/udev 657 root 876 S /sbin/ubusd 731 root 0 SW< [loop0] 735 root 0 SW [jbd2/loop0-8] 736 root 0 SW< [ext4-dio-unwrit] 757 root 0 SW< [loop1] 761 root 0 SW [jbd2/loop1-8] 762 root 0 SW< [ext4-dio-unwrit] 770 root 1480 S /sbin/netifd 824 root 1500 S udhcpc -p /var/run/udhcpc-eth0.2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth0.2 -C 968 root 0 SW [flush-8:0] 970 root 0 SW [flush-7:1] 1290 root 1640 S hostapd -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.conf 1383 root 1500 S /sbin/watchdog -t 5 /dev/watchdog 1522 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 1533 root 1496 S /usr/sbin/telnetd -l /bin/login.sh 1539 root 1696 S /usr/sbin/dbus-daemon --system 1544 nobody 2180 S avahi-daemon: running [CEpBGPrG_piratebox_lan.local] 1571 nobody 952 S /usr/sbin/dnsmasq -x /var/run/piratebox_dnsmasq.pid -C /opt/piratebox/conf/dnsmasq_generated.conf 1574 root 936 S radvd -p /opt/piratebox/tmp/radvd.pid -C /opt/piratebox/conf/radvd_generated.conf 1576 root 936 S radvd -p /opt/piratebox/tmp/radvd.pid -C /opt/piratebox/conf/radvd_generated.conf 1581 root 8212 S python /opt/piratebox/bin/droopy -d /opt/piratebox/share/Shared -m 8080 1598 nobody 3812 S /usr/sbin/lighttpd -f /opt/piratebox/conf/lighttpd/lighttpd.conf 1599 nobody 15564 S /usr/bin/php-cgi 1621 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.openwrt.pool.ntp.org -p 2.openwrt.pool.ntp.org -p 3.open 1622 nobody 15564 S /usr/bin/php-cgi 1623 root 1504 S /bin/ash --login 1668 root 1496 R ps
Re: PirateBox is setup and inactive but the USB key is always blinking December 12, 2017 04:23AM |
Admin Registered: 13 years ago Posts: 4,680 |
cat /proc/sys/vm/swappiness.
echo "1" > /proc/sys/vm/swappiness
Re: PirateBox is setup and inactive but the USB key is always blinking December 12, 2017 08:05AM |
Registered: 10 years ago Posts: 53 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 12, 2017 07:24PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 12, 2017 09:15PM |
Registered: 10 years ago Posts: 53 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 12, 2017 09:47PM |
Registered: 10 years ago Posts: 53 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 13, 2017 04:59AM |
Admin Registered: 13 years ago Posts: 4,680 |
swapoff --all
Re: PirateBox is setup and inactive but the USB key is always blinking December 13, 2017 08:35AM |
Registered: 10 years ago Posts: 53 |
# swapoff --all # free total used free shared buffers Mem: 29180 28180 1000 0 1000 -/+ buffers: 27180 2000 Swap: 0 0 0 # cat /sys/block/sda/stat 1131 220 74878 8720 109 165 858 4000 0 4440 12710 # cat /proc/diskstats 31 0 mtdblock0 0 0 0 0 0 0 0 0 0 0 0 31 1 mtdblock1 0 0 0 0 0 0 0 0 0 0 0 31 2 mtdblock2 100 3937 8074 7340 0 0 0 0 0 6370 7340 31 3 mtdblock3 1 3 32 10 0 0 0 0 0 10 10 31 4 mtdblock4 0 0 0 0 0 0 0 0 0 0 0 31 5 mtdblock5 1 3 32 10 0 0 0 0 0 10 10 8 0 sda 1131 220 74878 8720 109 165 858 4000 0 4440 12710 8 1 sda1 1130 220 74870 8720 109 165 858 4000 0 4440 12710 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0
# cat /sys/block/sda/stat 1131 220 74878 8720 109 165 858 4000 0 4440 12710 # cat /proc/diskstats 31 0 mtdblock0 0 0 0 0 0 0 0 0 0 0 0 31 1 mtdblock1 0 0 0 0 0 0 0 0 0 0 0 31 2 mtdblock2 100 3937 8074 7340 0 0 0 0 0 6370 7340 31 3 mtdblock3 1 3 32 10 0 0 0 0 0 10 10 31 4 mtdblock4 0 0 0 0 0 0 0 0 0 0 0 31 5 mtdblock5 1 3 32 10 0 0 0 0 0 10 10 8 0 sda 1131 220 74878 8720 109 165 858 4000 0 4440 12710 8 1 sda1 1130 220 74870 8720 109 165 858 4000 0 4440 12710 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 # free total used free shared buffers Mem: 29180 28176 1004 0 1000 -/+ buffers: 27176 2004 Swap: 0 0 0
# cat /sys/block/sda/stat 2668 14990 177033 19540 171 230 1073 4610 0 9680 24130 # cat /proc/diskstats 31 0 mtdblock0 0 0 0 0 0 0 0 0 0 0 0 31 1 mtdblock1 0 0 0 0 0 0 0 0 0 0 0 31 2 mtdblock2 152 6246 12796 12530 0 0 0 0 0 10400 12530 31 3 mtdblock3 1 3 32 10 0 0 0 0 0 10 10 31 4 mtdblock4 0 0 0 0 0 0 0 0 0 0 0 31 5 mtdblock5 1 3 32 10 0 0 0 0 0 10 10 8 0 sda 2668 14990 177033 19540 171 230 1073 4610 0 9680 24130 8 1 sda1 2667 14990 177025 19540 171 230 1073 4610 0 9680 24130 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 free total used free shared buffers Mem: 29180 27232 1948 0 516 -/+ buffers: 26716 2464 Swap: 0 0 0
Re: PirateBox is setup and inactive but the USB key is always blinking December 14, 2017 07:02PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 14, 2017 11:15PM |
Registered: 10 years ago Posts: 53 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 03:35AM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 05:00AM |
Admin Registered: 13 years ago Posts: 4,680 |
$ cat /opt/piratebox/version piratebox-ws_1.1.3 ## ext4-test 67d96d4 Testing different application image file with other ext4 options
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 08:16AM |
Registered: 10 years ago Posts: 53 |
root@OpenWrt:/# cat /opt/piratebox/version cat: can't open '/opt/piratebox/version': No such file or directory root@OpenWrt:/# cat /etc/openwrt_release DISTRIB_ID="OpenWrt_backports" DISTRIB_RELEASE="12.09.2" DISTRIB_REVISION="r42647" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic" DISTRIB_DESCRIPTION="OpenWrt_backports Attitude Adjustment 12.09.2" DISTRIB_BACKPORT="V0.3-MaStr" root@OpenWrt:/# mount rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) none on /proc/bus/usb type usbfs (rw,relatime) root@OpenWrt:/# free total used free shared buffers Mem: 29180 19236 9944 0 1892 -/+ buffers: 17344 11836 Swap: 0 0 0 root@OpenWrt:/# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 4992 280 4712 6% / /dev/root 2048 2048 0 100% /rom tmpfs 14592 64 14528 0% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 4992 280 4712 6% /overlay overlayfs:/overlay 4992 280 4712 6% /
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 04:18PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 07:54PM |
Registered: 10 years ago Posts: 53 |
root@OpenWrt:/# dmesg | tail -n 20 [ 30.870000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 30.880000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 31.310000] loop: module loaded [ 31.360000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.520000] nf_conntrack version 0.5.0 (455 buckets, 1820 max) [ 31.780000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 32.030000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded [ 35.110000] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 35.130000] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities [ 35.150000] EXT4-fs (loop0): recovery complete [ 35.150000] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 36.680000] ar71xx: pll_reg 0xb8050014: 0x1a000000 [ 36.980000] eth0: link up (1000Mbps/Full duplex) [ 36.980000] device eth0.1 entered promiscuous mode [ 36.990000] device eth0 entered promiscuous mode [ 37.000000] br-lan: port 1(eth0.1) entered forwarding state [ 37.000000] br-lan: port 1(eth0.1) entered forwarding state [ 37.680000] ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 39.000000] br-lan: port 1(eth0.1) entered forwarding state [ 42.830000] Adding 32764k swap on /mnt/usb/external_fs/OpenWRT.swap. Priority:-1 extents:1 across:32764k root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# dmesg | grep sda [ 10.300000] sd 0:0:0:0: [sda] 60549120 512-byte logical blocks: (31.0 GB/28.8 Gi [ 10.300000] sd 0:0:0:0: [sda] Write Protect is off [ 10.310000] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 10.310000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.320000] sda: sda1 [ 10.330000] sd 0:0:0:0: [sda] Attached SCSI removable disk root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# ls /dev/sd* /dev/sda /dev/sda1 root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [kworker/0:0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 7 root 0 SW [kworker/u:1] 62 root 0 SW [sync_supers] 64 root 0 SW [bdi-default] 66 root 0 SW< [kblockd] 95 root 0 SW [kswapd0] 143 root 0 SW [fsnotify_mark] 173 root 0 SW< [ath79-spi] 184 root 0 SW [mtdblock0] 189 root 0 SW [mtdblock1] 194 root 0 SW [mtdblock2] 199 root 0 SW [mtdblock3] 204 root 0 SW [mtdblock4] 209 root 0 SW [mtdblock5] 250 root 0 SW [kworker/0:1] 438 root 0 SWN [jffs2_gcd_mtd3] 440 root 0 SW [flush-mtd-unmap] 468 root 0 SW [khubd] 477 root 0 SW [scsi_eh_0] 478 root 0 SW [usb-storage] 479 root 0 SW [kworker/0:2] 502 root 1504 S init 536 root 0 SW< [cfg80211] 615 root 0 SW< [bat_events] 642 root 1508 S /sbin/syslogd -C16 644 root 1488 S /sbin/klogd 646 root 868 S /sbin/hotplug2 --override --persistent --set-rules-f 654 root 872 S /sbin/ubusd 729 root 0 SW< [loop0] 734 root 0 SW [jbd2/loop0-8] 735 root 0 SW< [ext4-dio-unwrit] 740 root 1476 S /sbin/netifd 798 root 1500 S udhcpc -p /var/run/udhcpc-eth0.2.pid -s /lib/netifd/ 944 root 0 SW [flush-8:0] 945 root 0 SW [flush-7:0] 1243 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 1263 root 1496 S /usr/sbin/telnetd -l /bin/login.sh 1355 root 1500 S /sbin/watchdog -t 5 /dev/watchdog 1435 nobody 956 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf 1460 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.ope 1461 root 1504 S /bin/ash --login 1476 root 1496 R ps
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 08:10PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 15, 2017 09:08PM |
Registered: 10 years ago Posts: 53 |
root@OpenWrt:/# /bin/box_installer.sh -e /bin/box_installer.sh : executing run_test /bin/box_installer.sh : Testing requirements... /bin/box_installer.sh : .. USB storage modules available /bin/box_installer.sh : extendRoot package is installed /bin/box_installer.sh : Trying to find next step /bin/box_installer.sh : executing run_signaling_extendRoot_start /bin/box_installer.sh : Trying to find next step /bin/box_installer.sh : executing run_prepare_extendRoot /bin/box_installer.sh : configure initi step for extendRoot /bin/box_installer.sh : Trying to find next step /bin/box_installer.sh : executing run_init_extendRoot /bin/box_installer.sh : not running extendRoot init, because it already is /bin/box_installer.sh : Trying to find next step /bin/box_installer.sh : executing run_signaling_extendRoot_stop /bin/box_installer.sh : Trying to find next step /bin/box_installer.sh : executing exit
Re: PirateBox is setup and inactive but the USB key is always blinking December 16, 2017 06:48AM |
Admin Registered: 13 years ago Posts: 4,680 |
Quote
/bin/box_installer.sh : not running extendRoot init, because it already is
tail -f /var/log/messages
Re: PirateBox is setup and inactive but the USB key is always blinking December 16, 2017 11:17AM |
Registered: 10 years ago Posts: 53 |
telnet 192.168.1.1 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ------------------------------------------ BusyBox v1.19.4 (2016-01-26 21:26:14 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- ATTITUDE ADJUSTMENT (12.09.2, r42647, V0.3-MaStr) With additional backports from BB [www.friedzombie.com] ----------------------------------------------------- * 1/4 oz Vodka Pour all ingredients into mixing * 1/4 oz Gin tin with ice, strain into glass. * 1/4 oz Amaretto * 1/4 oz Triple sec * 1/4 oz Peach schnapps * 1/4 oz Sour mix * 1 splash Cranberry juice ----------------------------------------------------- root@(none):/# root@(none):/# root@(none):/# ls bin etc lib overlay rom sbin tmp var dev init mnt proc root sys usr www root@(none):/# root@(none):/# root@(none):/# root@(none):/# /etc/init.d/boot start /etc/rc.common: line 85: can't create /etc/config/wireless: Read-only file system sh: ./inittab-console-fixup: line 25: can't create /etc/inittab: Read-only file system rm: can't remove 'inittab-console-fixup': Read-only file system uci: I/O error rm: can't remove 'leds': Read-only file system rm: can't remove 'migrate-shadow': Read-only file system rm: can't remove 'migrate-sysctl': Read-only file system touch: /etc/config/network: Read-only file system uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found rm: can't remove 'network': Read-only file system touch: /etc/config/ubootenv: Read-only file system rm: can't remove 'uboot-envtools': Read-only file system rm: can't remove 'vlan-migration': Read-only file system rm: can't remove 'wrt160nl': Read-only file system uci: I/O error uci: I/O error uci: I/O error uci: I/O error uci: I/O error uci: I/O error root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# mount /dev/sda1 /mnt mount: mounting /dev/sda1 on /mnt failed: No such file or directory root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# mount /dev/sda1 /mnt mount: mounting /dev/sda1 on /mnt failed: No such file or directory root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# mount /dev/sda /mnt mount: mounting /dev/sda on /mnt failed: No medium found root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# mount /dev/sda1 /mnt mount: mounting /dev/sda1 on /mnt failed: No such file or directory root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) debugfs on /sys/kernel/debug type debugfs (rw,relatime) root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# /etc/init.d/boot start mount: mounting debugfs on /sys/kernel/debug failed: Device or resource busy /etc/rc.common: line 85: can't create /etc/config/wireless: Read-only file system sh: ./inittab-console-fixup: line 25: can't create /etc/inittab: Read-only file system rm: can't remove 'inittab-console-fixup': Read-only file system led led rm: can't remove 'leds': Read-only file system rm: can't remove 'migrate-shadow': Read-only file system rm: can't remove 'migrate-sysctl': Read-only file system touch: /etc/config/network: Read-only file system uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found rm: can't remove 'network': Read-only file system touch: /etc/config/ubootenv: Read-only file system rm: can't remove 'uboot-envtools': Read-only file system rm: can't remove 'vlan-migration': Read-only file system rm: can't remove 'wrt160nl': Read-only file system uci: I/O error uci: I/O error uci: I/O error uci: I/O error uci: I/O error uci: I/O error root@OpenWrt:/# exit Connection closed by foreign host.
Re: PirateBox is setup and inactive but the USB key is always blinking December 16, 2017 02:18PM |
Admin Registered: 13 years ago Posts: 4,680 |
ls /dev/sd*b) you need to mount against /mnt (because /mnt/usb is not available at the failsafe partition)
Re: PirateBox is setup and inactive but the USB key is always blinking December 17, 2017 09:07AM |
Registered: 10 years ago Posts: 53 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 17, 2017 07:07PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 18, 2017 11:01AM |
Registered: 10 years ago Posts: 53 |
telnet 192.168.1.1 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ------------------------------------------ BusyBox v1.19.4 (2016-01-26 21:26:14 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- ATTITUDE ADJUSTMENT (12.09.2, r42647, V0.3-MaStr) With additional backports from BB [www.friedzombie.com] ----------------------------------------------------- * 1/4 oz Vodka Pour all ingredients into mixing * 1/4 oz Gin tin with ice, strain into glass. * 1/4 oz Amaretto * 1/4 oz Triple sec * 1/4 oz Peach schnapps * 1/4 oz Sour mix * 1 splash Cranberry juice ----------------------------------------------------- root@OpenWrt:/# root@OpenWrt:/# tail -f /var/log/messages Jan 1 00:00:54 OpenWrt user.notice root: /bin/box_installer.sh : executing run_prepare_extendRoot Jan 1 00:00:54 OpenWrt user.notice root: /bin/box_installer.sh : configure initi step for extendRoot Jan 1 00:00:54 OpenWrt user.notice root: /bin/box_installer.sh : Trying to find next step Jan 1 00:00:54 OpenWrt user.notice root: /bin/box_installer.sh : executing run_init_extendRoot Jan 1 00:00:54 OpenWrt user.notice root: Please connect USB disk. If it is already plugged-in, Jan 1 00:00:54 OpenWrt user.notice root: wait for a few seconds, and if nothing happens, please Jan 1 00:00:54 OpenWrt user.notice root: reconnect the device. Keep in mind that your router's Jan 1 00:00:54 OpenWrt user.notice root: ports may not be able to supply enough power to Jan 1 00:00:54 OpenWrt user.notice root: spin-up a USB HDD. Jan 1 00:00:54 OpenWrt authpriv.info dropbear[1367]: Running in background Jan 1 00:02:40 OpenWrt user.notice root: .......................................................................................................... Jan 1 00:02:40 OpenWrt user.notice root: USB disk is now available. Continuing... Jan 1 00:02:41 OpenWrt user.notice root: /etc/init.d/ext: Mounting external USB storage... Jan 1 00:02:41 OpenWrt user.notice root: /etc/init.d/ext: Forcing overwrite of /mnt/usb/external_fs/OpenWRT.img if it already exsits Jan 1 00:02:41 OpenWrt user.notice root: /etc/init.d/ext: Creating ext loop image... Jan 1 00:02:54 OpenWrt user.notice root: /etc/init.d/ext: Including the external mountpoint to system Jan 1 00:02:54 OpenWrt user.notice root: /etc/init.d/ext: Creating /bin/ext_path_fixer Jan 1 00:02:54 OpenWrt user.notice root: /etc/init.d/ext: Including ext_path_fixer to /etc/profile Jan 1 00:02:54 OpenWrt user.notice root: /etc/init.d/ext: Including ext_path_fixer to /etc/rc.common Jan 1 00:02:55 OpenWrt user.notice root: /etc/init.d/ext: Enable for startup Jan 1 00:02:55 OpenWrt user.notice root: /etc/init.d/ext: Starting... Jan 1 00:02:55 OpenWrt user.notice root: If you run this during an install or run the init the first time Jan 1 00:02:55 OpenWrt user.notice root: please run Jan 1 00:02:55 OpenWrt user.notice root: source /etc/profile Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : Trying to find next step Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : executing run_signaling_extendRoot_stop Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : Trying to find next step Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : executing exit
^C root@OpenWrt:/# root@OpenWrt:/# ls bin dev etc init lib mnt overlay proc rom root sbin sys tmp usr var www root@OpenWrt:/# root@OpenWrt:/# ls /dev/sd* /dev/sda /dev/sda1 root@OpenWrt:/# root@OpenWrt:/# tail -f /var/log/messages Jan 1 00:02:54 OpenWrt user.notice root: /etc/init.d/ext: Including ext_path_fixer to /etc/rc.common Jan 1 00:02:55 OpenWrt user.notice root: /etc/init.d/ext: Enable for startup Jan 1 00:02:55 OpenWrt user.notice root: /etc/init.d/ext: Starting... Jan 1 00:02:55 OpenWrt user.notice root: If you run this during an install or run the init the first time Jan 1 00:02:55 OpenWrt user.notice root: please run Jan 1 00:02:55 OpenWrt user.notice root: source /etc/profile Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : Trying to find next step Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : executing run_signaling_extendRoot_stop Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : Trying to find next step Jan 1 00:02:55 OpenWrt user.notice root: /bin/box_installer.sh : executing exit top Mem: 27340K used, 1840K free, 0K shrd, 1384K buff, 12796K cached CPU: 0% usr 18% sys 0% nic 81% idle 0% io 0% irq 0% sirq Load average: 0.00 0.01 0.05 1/44 1672 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 1672 1440 root R 1496 5% 9% top 1255 1 nobody S 956 3% 9% /usr/sbin/dnsmasq -C /var/etc/dnsmasq 671 1 root S 1508 5% 0% /sbin/syslogd -C16 1 0 root S 1504 5% 0% init 608 1 root S 1504 5% 0% init 1663 1 root S 1500 5% 0% /usr/sbin/ntpd -n -p 0.openwrt.pool.n 761 709 root S 1500 5% 0% udhcpc -p /var/run/udhcpc-eth0.2.pid 1184 1 root S 1500 5% 0% /sbin/watchdog -t 5 /dev/watchdog 1440 1098 root S 1500 5% 0% /bin/ash --login 1098 1 root S 1496 5% 0% /usr/sbin/telnetd -l /bin/login.sh 1347 1 root S 1492 5% 0% syslogd -n -L -R 192.168.1.2:9999 673 1 root S 1488 5% 0% /sbin/klogd 709 1 root S 1476 5% 0% /sbin/netifd 1367 1 root S 1152 4% 0% /usr/sbin/dropbear -P /var/run/dropbe 685 1 root S 872 3% 0% /sbin/ubusd 675 1 root S 860 3% 0% /sbin/hotplug2 --override --persisten 5 2 root SW 0 0% 0% [kworker/u:0] 250 2 root SW 0 0% 0% [kworker/0:1] 3 2 root SW 0 0% 0% [ksoftirqd/0] ^C485 2 root SW 0 0% 0% [usb-storage] root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# root@OpenWrt:/# ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [kworker/0:0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 7 root 0 SW [kworker/u:1] 62 root 0 SW [sync_supers] 64 root 0 SW [bdi-default] 66 root 0 SW< [kblockd] 95 root 0 SW [kswapd0] 143 root 0 SW [fsnotify_mark] 173 root 0 SW< [ath79-spi] 184 root 0 SW [mtdblock0] 189 root 0 SW [mtdblock1] 194 root 0 SW [mtdblock2] 199 root 0 SW [mtdblock3] 204 root 0 SW [mtdblock4] 209 root 0 SW [mtdblock5] 250 root 0 SW [kworker/0:1] 492 root 0 SW< [cfg80211] 503 root 0 SW [khubd] 572 root 0 SW< [bat_events] 608 root 1504 S init 671 root 1508 S /sbin/syslogd -C16 673 root 1488 S /sbin/klogd 675 root 860 S /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin/u 685 root 872 S /sbin/ubusd 709 root 1476 S /sbin/netifd 761 root 1500 S udhcpc -p /var/run/udhcpc-eth0.2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth0.2 -C 1098 root 1496 S /usr/sbin/telnetd -l /bin/login.sh 1184 root 1500 S /sbin/watchdog -t 5 /dev/watchdog 1255 nobody 956 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf 1276 root 0 SWN [jffs2_gcd_mtd3] 1347 root 1492 S syslogd -n -L -R 192.168.1.2:9999 1367 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 1440 root 1500 S /bin/ash --login 1484 root 0 SW [scsi_eh_0] 1485 root 0 SW [usb-storage] 1635 root 0 SW< [loop0] 1640 root 0 SW [jbd2/loop0-8] 1641 root 0 SW< [ext4-dio-unwrit] 1663 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.openwrt.pool.ntp.org -p 2.openwrt.pool.ntp.org -p 3.o 1673 root 1496 R ps
Re: PirateBox is setup and inactive but the USB key is always blinking December 18, 2017 07:51PM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 19, 2017 05:00AM |
Registered: 10 years ago Posts: 53 |
root@OpenWrt:/# root@OpenWrt:/# ls bin etc lib overlay rom sbin tmp var dev init mnt proc root sys usr www root@OpenWrt:/# root@OpenWrt:/# cd /mnt/usb root@OpenWrt:/mnt/usb# ls PirateBox OFF external_fs install v1.13 headers auto_flash fw install.log root@OpenWrt:/mnt/usb# cd install/ root@OpenWrt:/mnt/usb/install# ls OpenWRT.img.gz kareha_3.1.4.zip auto_package_done piratebox_ws_1.1_img.tar.gz cache root@OpenWrt:/mnt/usb/install# ls -l -rwxrwxrwx 1 root root 56082 Dec 15 2017 OpenWRT.img.gz -rwxrwxrwx 1 root root 99 Jan 1 1980 auto_package_done drwxrwxrwx 2 root root 16384 Dec 15 2017 cache -rwxrwxrwx 1 root root 222185 Dec 15 2017 kareha_3.1.4.zip -rwxrwxrwx 1 root root 398865 Dec 15 2017 piratebox_ws_1.1_img.tar.gz root@OpenWrt:/mnt/usb/install# root@OpenWrt:/mnt/usb/install# cat auto_package_done extendRoot-avahi extendRoot-dbus extendRoot-piratebox piratebox-mod-imageboard extendRoot-minidlna
Re: PirateBox is setup and inactive but the USB key is always blinking December 19, 2017 07:14AM |
Admin Registered: 13 years ago Posts: 4,680 |
Re: PirateBox is setup and inactive but the USB key is always blinking December 19, 2017 08:30AM |
Registered: 10 years ago Posts: 53 |
# cat /opt/piratebox/version piratebox-ws_1.1.3 ## master...origin/master [ahead 32] 150ba18 Merge branch 'hotfix-1.1.3' # cat /etc/openwrt_release DISTRIB_ID="OpenWrt_backports" DISTRIB_RELEASE="12.09.2" DISTRIB_REVISION="r42647" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic" DISTRIB_DESCRIPTION="OpenWrt_backports Attitude Adjustment 12.09.2" DISTRIB_BACKPORT="V0.3-MaStr"
Re: PirateBox is setup and inactive but the USB key is always blinking December 19, 2017 09:21AM |
Admin Registered: 13 years ago Posts: 4,680 |
Quote
$ cat version
piratebox-ws_1.1.3
## ext4-test
67d96d4 Testing different application image file with other ext4 options
# cat /opt/piratebox/version # cat /etc/openwrt_releaseagain.
Re: PirateBox is setup and inactive but the USB key is always blinking December 19, 2017 09:31PM |
Registered: 10 years ago Posts: 53 |
root@jYTPYFtJ:/# root@jYTPYFtJ:/# mount rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) none on /proc/bus/usb type usbfs (rw,relatime) root@jYTPYFtJ:/# root@jYTPYFtJ:/# root@jYTPYFtJ:/# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 4992 296 4696 6% / /dev/root 2048 2048 0 100% /rom tmpfs 14592 68 14524 0% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 4992 296 4696 6% /overlay overlayfs:/overlay 4992 296 4696 6% / root@jYTPYFtJ:/# root@jYTPYFtJ:/# cat /etc/openwrt_release DISTRIB_ID="OpenWrt_backports" DISTRIB_RELEASE="12.09.2" DISTRIB_REVISION="r42647" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic" DISTRIB_DESCRIPTION="OpenWrt_backports Attitude Adjustment 12.09.2" DISTRIB_BACKPORT="V0.3-MaStr" root@jYTPYFtJ:/# root@jYTPYFtJ:/# cat /opt/piratebox/version cat: can't open '/opt/piratebox/version': No such file or directory root@jYTPYFtJ:/# root@jYTPYFtJ:/# cat /opt/piratebox/version cat: can't open '/opt/piratebox/version': No such file or directory root@jYTPYFtJ:/# root@jYTPYFtJ:/# root@jYTPYFtJ:/# mount /dev/sda1 /mnt mount: mounting /dev/sda1 on /mnt failed: No such file or directory root@jYTPYFtJ:/# root@jYTPYFtJ:/# /etc/init.d/boot start mount: mounting debugfs on /sys/kernel/debug failed: Device or resource busy root@jYTPYFtJ:/# root@jYTPYFtJ:/# mount_root /sbin/mount_root: line 1: pi_include: not found /sbin/mount_root: line 1: pi_include: not found /sbin/mount_root: line 1: set_jffs_mp: not found /sbin/mount_root: line 1: determine_root_device: not found switching to jffs2 root@jYTPYFtJ:/# root@jYTPYFtJ:/# cd /mnt/usb/ root@jYTPYFtJ:/mnt/usb# ls root@jYTPYFtJ:/mnt/usb# ls root@jYTPYFtJ:/mnt/usb# mount rootfs on / type rootfs (rw) /dev/root on /rom/rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /rom/overlay type jffs2 (rw,noatime) overlayfs:/overlay on /rom type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) none on /proc/bus/usb type usbfs (rw,relatime) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,noatime,lowerdir=/,upperdir=/overlay)
Re: PirateBox is setup and inactive but the USB key is always blinking December 20, 2017 08:39AM |
Admin Registered: 13 years ago Posts: 4,680 |