Can't acess failsafe mode anymore

Hi,

I have a problem with my TL-MR3020.
I was always able to connect to the router by enabling the fail safe mode (clicking after 10s on the WPS/Reset-Button.
But then I had problems with my Piratebox and wanted to reset it. So I decided to follow these instructions I found on the forum (http://forum.daviddarts.com/read.php?2,3974,4009#msg-4009):

cd /tmp
wget [piratebox.aod-rpg.de]
mtd write openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin firmware
reboot

Now the router is only blinking and I can't reset him to failsafe mode anymore.

Can you please help me?

I am afraid that your router is bricked already. The only way I know is to flash it using serial port. For more information, you could go to [wiki.openwrt.org] .

johanrusli Wrote:
-------------------------------------------------------
> I am afraid that your router is bricked already.
> The only way I know is to flash it using serial
> port. For more information, you could go to
> [wiki.openwrt.org]
> al.method.using.serial.console.and.tftp.experts .


Ok I have to read more about tftp:
I get the error-message:

Traceback (most recent call last):
  File "/usr/sbin/tftpd", line 51, in <module>
    import tornado.ioloop as ioloop
ImportError: No module named tornado.ioloop

I'm going to try it with this wiki:
[wiki.ubuntuusers.de]



Edited 1 time(s). Last edit at 10/11/2013 01:03PM by bla.