Problem solved: Its written in the config.pl file: Piratebox/board/config.pl Line 7 #sytem config use constant ADMIN_PASS => 'FORUMPASSWORD'; Hope to help others with same brainleaks Greetingsby halbschlaf - PirateBox OpenWrt
Hey, I use OpenWrt and hardware tp3020. Everything works great for years. But unfortunatally I forgot the password for the forum. What can I do? Greatingby halbschlaf - PirateBox OpenWrt
Simply deleting the index.html reconstructed the original forum on PirateBox. Works without problems. thank youby halbschlaf - PirateBox OpenWrt
When I use android-phones it opens the PirateBox automatically, too. But I had same connection problem with my notebook. Finally I connect the notebook-browser manually with "piratebox.lan". So it works for me.by halbschlaf - PirateBox OpenWrt
yes - Its always blank page. I tried by menu-button "FORUM" and it connects automatically to "piratebox.lan/board/". If I change the adress to "piratebox.lan/board/kareha.pl" it opens "piratebox.lan/board/index.html". No matter what I do - its always blank page. QuoteMatthias Double check the file /opt/piratebox/tmp/break.log after testing it.by halbschlaf - PirateBox OpenWrt
Hi, I tested the Forum on PirateBox, so I wrote a post and it worked without problems. Nexttime I want to check that post, and logged into the PirateBox again. But now it doesn't connect to the Forum. It tries to open: piratebox.lan/board But nothing happens? What is going wrong? Any ideas?by halbschlaf - PirateBox OpenWrt
Thanks again !!! Matthias you are the BEST !!! USB-Stick changed successfully - läuftby halbschlaf - PirateBox OpenWrt
Hi, I installed the PirateBox and all works. Now I want to change the USB-Stick. (Because of the size) I formated a new USB-Stick. Then made simply copy-paste form old to newone. (Both sticks are 16GB.) But It seems, that something is wrong? Cant connect to PirateBox with the new USB-Stick? Any ideas? Is it possible with simply copy-paste to change the USB-stick?by halbschlaf - PirateBox OpenWrt
Finally I only forgot the last ";" in the code. Now installation ran without troubles. Thank you Matthias!!!by halbschlaf - PirateBox OpenWrt
I tried again, but the LEDs still endless blinking There are no wifi-connetction, only LAN with TR-WR3020? Neither PirateBox Wlan nor LAN? The USB LEDs doesnt blink? root@OpenWrt:~# tail -f -n 30 /var/log/messages Jan 1 00:00:47 OpenWrt syslog.info syslogd started: BusyBox v1.19.4 Jan 1 00:00:47 OpenWrt user.notice root: /bin/box_installer.sh : executing run_test Jan 1 00:00:47 Openby halbschlaf - PirateBox OpenWrt
Thank you for help. Before i read your answere, I already reflashed. I tried to install for a second time. I let the wr3020 reboot for 1,5h, but the leds still blinking. power=permanent wifi=blinking reset=blinking However I continued with telenet via putty. Set Password and Time. Same Problem. Here are the codes: root@OpenWrt:/# ls -la /mnt/ drwxr-xr-x 2 root rootby halbschlaf - PirateBox OpenWrt
Hello, I am noob. However I tried to install PirateBox on TP-MR3020 but it doesent work. I followed the instructions on . My Problem is while Post-Installation. When I try to activate the imageboard, it says -ash: /opt/piratebox/bin/board-autoconf.sh: not found It seems there is no /opt folder What did I wrong? I would like to flash the original TP-firmware, but I am afraid tby halbschlaf - PirateBox OpenWrt