IMAGE RASPBERRY INSTALLATION PROBLEMs

zip itself is called ArchLinuxARMv6-2015-06_PirateBox1.0.2_rpi_1.0.5.img.zip and contain file image called raw_arch_image_file.img

But if you copy it into your 8gb sd card and put it into Raspberry pi, it don't work, don't start, don't install... sometime only rgb screen is displayed.

No one say why?

I'm waiting reply from a long time...

Thank you

you need to use the DD utility (or something similiar for windoes) to write the "raw" file to the SDCard.
You find additional help here - Installation -step 2 . We have different howtos for different OS linkes.

---

This is only my signature.

Dear,

thank you for your reply,

but i used Win32DiskImager for install image into sd card as indicated on your post. For all raspberry image (noob, raspbian, etc,) no problem... they install successfull

Tested and success installation for all raspberry image. I apply right procedure.

Only with ArchLinuxARMv6-2015-06_PirateBox1.0.2_rpi_1.0.5.img.zip raspberry do not work.

One time raspberry start with green led fixed and rgb monitor displayed, one time do not start (only red led from raspberry boot)

After this, i have formatted another time my sd, i installed ubuntu arm image, and i see that it work !

Are you sure your image is ok ?

I don't see none really successfull installation on internet of raspberry with your piratebox image. No one post with detailed instruction and version evaluation. Why ?

Please verify !

Do you have a RaspberryPi2 ? That one is currently not supported.

I, actually, got my PirateBox working with the extracted zip file.

regards Matthias

Hi,

i tested installation but after that i can't find raspberry network...

all service are started and enabled, configuration is ok, but i can't find it....

why ?

maybe a problem with the wifi card you are using... which one do you use?

---

This is only my signature.