Imageboard Install Issues

Hello!

I was tinkering with the piratebox, and i renamed a lot of things to ShareBox instead (I thought PirateBox might scare off too many people). I changed the GUI for everything and it was working great! Uploads were working to the SD Card, and the imageboard was working, but when I went for one final test, it gave me an error 500. So I tested a few things, original board and post would load, but I was not able to change anything. So I loaded up another SD card and copied over a new piratebox image. I was able to pull all of the original /board files over, thinking that I could just reinstall the board. Well after reading may posts and trying the manual install (https://forum.piratebox.cc/read.php?7,14067) I am stuck. The error I am getting when i visit [sharebox.lan] is as follows:

Can't locate CGI/Carp.pm in @INC (you may need to install the CGI::Carp module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /opt/piratebox/www/board/kareha.pl line 3.
BEGIN failed--compilation aborted at /opt/piratebox/www/board/kareha.pl line 3.

I have tried to reinstall the board a few times, and this is the result each time. I am not sure if I changed something when changing it over to the "sharebox" instead of "piratebox", but I would like to have the forum working for when I go test this downtown. Please let me know what I can do to fix this.

Thanks for your time!

woods

I fixed it. Installed perl-cgi and poof.