Hardware error after some time without using it
Posted by von
This forum is currently read only. You can not log in or make any changes. This is a temporary situation.
Now, this forum is in read-only mode. You find details Details hereContinue on /r/PirateBox
|
Hardware error after some time without using it November 19, 2018 02:49PM |
Hi everyone !
I have a my piratebox on a Raspberry Pi Zero W, with USB key for storage, and it worked well, installed easily and stuff.
Then I didn't use it for about a month or 2, and then when I plugged it back, no hotspot appeared.
I used a HDMI cable to see the boot logs and I saw that I crashed on that line :
And then prompted for alarmpi login.
So I did log in and saw nothing wrong, I ran the motd commands again but that didn't do anything.
Do you know what happened ? Should I flash the sd card again ?
Thanks
I have a my piratebox on a Raspberry Pi Zero W, with USB key for storage, and it worked well, installed easily and stuff.
Then I didn't use it for about a month or 2, and then when I plugged it back, no hotspot appeared.
I used a HDMI cable to see the boot logs and I saw that I crashed on that line :
rtc-ds1307: probe of 1-0068 failed with error -121
And then prompted for alarmpi login.
So I did log in and saw nothing wrong, I ran the motd commands again but that didn't do anything.
Do you know what happened ? Should I flash the sd card again ?
Thanks