U-Boot won't work

About a week ago I tried installing LuCi on my piratebox because I Needed to use it for something other than piratebox at the moment. I went to disable the HTTP redirect and changed the IP address of something and now the wifi network no longer shows up and when I try to boot into uboot to reflash the factory firmware, u-boot won't load either. Is it possible to recover from a brick like this?

Did you tried to get access via a serial connection, when you are talking about uboot?

No, I mean pressing the reset button on boot and going to the web uboot interface. Also if it helps, I believe I changed 192.168.1.1 to something else in /etc/config/network. I also have the GL-ar150.



Edited 3 time(s). Last edit at 03/11/2019 03:06AM by search google or type url.

OH! AR150 has a uboot web gui!
Did you set your computer to a static IP adress, because it does not provide a tcpip service.
And the uboot web interface has nothing to do with the configured IP address inside OpenWrt/PirateBox

best regards
Matthias