Hi Where can I by Nadia?by dimidu - PirateBox (General)
Yes! I solved this now. I have new install and before starting piratebox, I had changed in index.html piratebox.lan to my static IPby dimidu - PirateBox (General)
PirateBox starting ok. And I have allredy set DROOPY_USE_USER="yes"by dimidu - PirateBox (General)
I try set USE_DNSMASQ="yes" but have same resultby dimidu - PirateBox (General)
Hi Now I can not stoping droopy, I got error: pi@raspberrypi ~ $ sudo /etc/init.d/piratebox stop ln: Symbolischen Verknüpfung „/opt/piratebox/www/board/board“ konnte angelgt werden: Die Datei existiert bereits ln: Symbolischen Verknüpfung „/opt/piratebox/www/Shared/Shared“ konnte angelgt werden: Die Datei existiert bereits [....] Stopping script piratebox: [ ok ] Stopping lighttpd...:.by dimidu - PirateBox (General)
Thanks! I must try this tomorrow, now I have no connection to server over bat0.by dimidu - PirateBox (General)
Thanks! I had PB new install and I get the error: pi@raspberrypi /opt/piratebox $ sudo update-rc.d piratebox defaults update-rc.d: using dependency based boot sequencing update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match piratebox Default-Stop values (1 0)by dimidu - PirateBox (General)
pi@raspberrypi ~ $ sudo fuser -v 80/tcp BEN. PID ZUGR. BEFEHL 80/tcp: nobody 6511 F.... lighttpdby dimidu - PirateBox (General)
And now I have problem, when I starting Piratebox I always get [....] Starting lighttpd...:2012-10-27 21:24:53: (network.c.379) can't bind to port: 80 Address already in use (warning). but PB ist running.by dimidu - PirateBox (General)
I want install PB on RPi over LAN with static IP. My RPi has now static IP 10.71.1.77 on interface bat0 and I can ping 10.71.1.77 from any PC in the LAN-network (FF-cloud). I had installed PB on RPi over LAN and changed piratebox.conf DO_IFCONFIG , USE_APN, USE_DNSMASQ to no Now PB is runing and when I go to in brouser to 10.71.1.77 I get landing page with shout, forum and brouser files worby dimidu - PirateBox (General)
I have solved blinking page, In piratebox.conf MUST NOT change piratebox.lan to locale static IP only in index.html must change piratebox.lan to locale static IP from server. And now in whole FF cloud I go to 10.71.1.77 and have PirateBox. Can I change PirateBox name to "Box" or so? Im wiki PirateBox on Raspberry Pi http://piratebox.aod-rpg.de/dokuwiki/doku.php?id=raspberry Thby dimidu - PirateBox (General)
I had solved redirect to test.du.ff while changed /etc/hosts localhost test.du.ff to 127.0.0.1 Now I can see PirateBox page from FF-cloud when I go to 10.71.1.77 every secunde I get redirect - the page is blink.by dimidu - PirateBox (General)
Yes! I can ping 10.71.1.77 from router or from my nettop connected to FF-cloud. And when i take in brouser 10.71.1.77 I get start site PirateBox for 1 sec. and then I get redirect to blank page test.du.ff I had changed in piratebox.conf, index.html and redirect.html test.du.ff to 10.71.1.77 and deleted entry at router's bat-hosts but result is always the same. When I connected to FF witby dimidu - PirateBox (General)
I can ping only MAC adress or bat host name: root@meinode1:~# batctl p 7c:dd:90:1c:db:3b PING 7c:dd:90:1c:db:3b (7c:dd:90:1c:db:3b) 20(48) bytes of data 20 bytes from 7c:dd:90:1c:db:3b icmp_seq=1 ttl=50 time=0.79 ms 20 bytes from 7c:dd:90:1c:db:3b icmp_seq=2 ttl=50 time=0.92 ms 20 bytes from 7c:dd:90:1c:db:3b icmp_seq=3 ttl=50 time=0.77 ms ^C--- 7c:dd:90:1c:db:3b ping statistics --- 3 paby dimidu - PirateBox (General)
Yes RPi can see over clients and over clients can see RPi. pi@raspberrypi ~ $ sudo batctl o Originator last-seen (#/255) Nexthop : Potential nexthops ... 92:f6:52:a7:77:69 1.020s ( 98) 16:e6:e4:e3:95:a9 [ wlan0]: 16:e6:e4:e3:95:a9 ( 98) fa:d1:11:a0:5f:e7 0.900s ( 82) 16:e6:e4:e3:95:a9 [ wlan0]: 16:e6:e4:e3:95:a9 ( 82) 16:e6:e4:e3:95:a9 0.460s (25by dimidu - PirateBox (General)
Router - 2012.2.0 RPi - 2011.4.0 (compatibility version 14)by dimidu - PirateBox (General)
In FF-network every FF-router doing 2 wlan-network: 1 ad-hoc network - with the network every node connect to neighbors noden and getting mesh-network. 2 - public AP, with the network everybody can connect to mesh-network with netbook or mobile. Every connected client get IP4 and IP6. If at least one node has Internet Accses then whole FF-cloud has that. I want every client who going to "by dimidu - PirateBox (General)
I want only PirateBox runing within FF-cloud.by dimidu - PirateBox (General)
What I have change in redirect and index.html? piratebox.lan to my domen? I had done all but no succses. May be I must setting firewall, pi@raspberrypi ~ $ ifconfig bat0 bat0 Link encap:Ethernet HWaddr ee:cb:59:b5:b5:a0 inet addr:10.71.1.77 Bcast:10.255.255.255 Mask:255.0.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9236 erroby dimidu - PirateBox (General)
Is done, PB run on RPi but I don't know how I can connect to server from Freifunk-cloud. I can ping from router with RPi's MAC or with test.du.ff but I have no idea what I do now.by dimidu - PirateBox (General)
Hi! I trying install PB on RPi with Freifunk. First I have got Freifunk on RPi: now RPi connected over batman-adv with my freifunk-router(wr703n) on router: batctl o Originator last-seen (#/255) Nexthop : Potential nexthops ... 92:f6:52:a7:77:69 2.190s (116) fa:0b:b4:65:48:cf [ n2n2]: fa:0b:b4:65:48:cf (116) fa:d1:11:a0:5f:e7 0.920s (102) fa:0b:b4:by dimidu - PirateBox (General)
Yes, I write late, when i trying. Thanksby dimidu - PirateBox (General)
Hi I live in Duisburg. We got freifunk images from http://fnordeingang.de/wiki/Freifunk_Images Freifunk runing ok. To me on wr703n. I want now runing PB on wr703n with Freifunk. PB must runing on Freifunk-cloud at bat0by dimidu - PirateBox (General)
Yes. RPi connect to router when both network has same name.by dimidu - PirateBox (General)
Thanks! I got it. Raspbian has no service network-manager. I must apt-get instal iw too.by dimidu - PirateBox (General)
I have usb-wlan RT5370. It is not in the list am linuxwirelees.org but pi@raspberrypi ~ $ sudo iw phy Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time sby dimidu - PirateBox (General)
Hi I want meshing Raspberry Pi with mesh network (freifunk) first, and then run PB on Raspberry Pi inside mesh network (bat0) i do as here http://www.open-mesh.org/projects/batman-adv/wiki/Quick-start-guide On all nodes, install batman-adv, load the module and enter the following commands: ifconfig wlan0 mtu 1528 iwconfig wlan0 mode ad-hoc essid my-mesh-network ap 02:12:34:56:78:9A chaby dimidu - PirateBox (General)
I had solved that now with change in piratebox.conf DROOPY_USE_USER="no" i had change to "yes" and sudo /etc/init.d/piratebox stop sudo /etc/init.d/piratebox startby dimidu - Raspberry Pi(rate)Box
Now i had new install PB on RPi with another wlan RT5370 as tutorial, point to point. PB start ok: pi@raspberrypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox : Generating hosts file .... Generating dnsmasq.conf ..... Empty tmp folder rm: cannot remove `/opt/piratebox/tmp/': Is a directory [....] Setting up wlan:Bringing up wifi interface wlan0 Settiby dimidu - Raspberry Pi(rate)Box
Hi I had istall PB on Raspberry Pi with Belkin Components F5D7050 Wireless G Adapter v3000 Seems so PB runs, when i start piratebox i got pi@raspberrypi /opt/piratebox $ sudo /etc/init.d/piratebox start [....] Starting script piratebox : Generating hosts file .... Generating dnsmasq.conf ..... Empty tmp folder rm: Entfernen von „/opt/piratebox/tmp/“ nicht möglich: Ist ein Verzeicby dimidu - Raspberry Pi(rate)Box