Hi Mattias Thanks for the post I got it sorted. It works! Thanks. Crettenby Cretten - Raspberry Pi(rate)Box
Hello So I at long last got my Raspberry PirateBox to work and boot up thanks to this post . Thanks Matthias! My problem now is. I think I have my USB 1tb HDD mounted. My question is how to I get my file moved over from my 16gb SD cards which the OS is running off of now. and get the Raspberry to boot of the 1tb I'm not very clued up on Linux but I got this far so can follow iby Cretten - Raspberry Pi(rate)Box
Matthias Wrote: ------------------------------------------------------- > HI, > in this case run the following command exactly, > after that the PirateBox init.d script waits until > the USB-Wifi is ready: > > sed -i > 's|PROBE_INTERFACE="no"|PROBE_INTERFACE="yes"|g' > /opt/piratebox/conf/piratebox.conf > > > Then the nby Cretten - Raspberry Pi(rate)Box
Hi all Need some help. I've installed the Archlinux to the sd card. Once I do the remove Ethernet cable and power it down then on again the WiFi will not start so my thinking is PirateBox isnt starting itself up. I did the command “systemctl enable piratebox” Also I can never get the HDD or flash drive to work. I'm not to familiar with Linux but was able to follow the guideby Cretten - Raspberry Pi(rate)Box